|
| |
 | - PDF Version | |
| Reaction Chamber Diffuse Reflectance |
|
Applications
|
Low Temperature Reaction Chamber 
High Temperature Reaction Chamber |
|
|
||||||||||||||||||||||||||
| Ordering Information | Catalog No. | |
| FT-IR(KBr windows) | UV-VIS(SiO2 windows) | High Temperature Reaction Chamber,24V | HVC-DRP-3 | HVC-VUV-3 | Low Temperature Reaction Chamber,24V | CHC-CHA-3 | CHC-VUV-3 |
| Options and Replacement Parts | ||
| High Pressure Dome for the HVC-DRP with ZnS windows | HVC-DWI-3 | |
| High Pressure Dome for the HVC-DRP with ZnSe windows | HVC-DWM-3 | |
| High Pressure Dome for the HVC-DRP with SiO2 windows | HVC-DWA-3 | |
| Automatic Temperature Controller, 110V input, 24V output | ATC-024-1 | |
| Automatic Temperature Controller, 220V/240V input, 24V output (CE marked) | ATC-024-2 | |
| Screen Set, two each of three mesh sizes | 116-439 | |
| Heater Assembly for the HVC and CHC, 24V | HVC-HTR | |
| Heater, 24V | HTRS-16 | |
| Accessory Vacuum Pumps | VPE-001 | |
| Accessory Vacuum Pumps | VPE-002 | |
| Oil, 1 quart | VPE-OIL | |
|
Diffuse reflection spectroscopy is a very sensitive method for detecting changes at the surface of rough materials in the infrared and UV-VIS. It is particularly effective for powders with a high surface area. This makes diffuse reflectance a valuable tool for catalysis, oxidation, and photochemical studies. However, measurements for these applications must be obtained in a carefully controlled environment.
For this purpose, Harrick Scientific offers two reaction chamber models for use in conjunction with the Praying Mantis Diffuse Reflection Attachment. Both reaction chambers are constructed of chemically resistant 316 stainless steel and can be heated up to at least 600°C under vacuum. These DRIFTS reaction chambers feature a sample cup that is part of a temperature-controlled sample stage. This stage incorporates a cartridge heater and K-type thermocouple. The electrical leads to the heater and thermocouple are located on the outside of the chamber for convenience. The stage is thermally isolated from the outer reaction chamber. A water-cooling jacket is provided to control the temperature of the outer chamber and windows during high and/or low temperature operation. The reaction chamber also features three gas ports for evacuating, pressurizing or flowing gas through the sample. These ports have 1/4" VCO fittings with Viton o-rings. One of these ports leads directly under the sample cup; the other two lead into the sides of the chamber. Optically, these diffuse reflectance reaction chambers are designed to minimize reflection losses from the windows and maximize light interaction with the sample. The radiation enters and exits the chamber perpendicular to the two optical apertures. A third aperture is provided for viewing, illuminating, or irradiating the sample. This makes the reaction chambers useful for photochemical studies. Both reaction chambers include two KBr windows and a glass observation window. These windows are mounted in a removable stainless steel dome using o-ring seals. Both DRIFTS reaction chambers can be operated from high vacuum to two or three atmospheres with the KBr and glass windows provided. Other window materials are available for higher operating pressures and for different wavelength regions. Low refractive index window materials should be selected to minimize reflection losses. The High Temperature Reaction Chamber, HVC-DRP, is designed for operation from room temperature up to at least 600° C under vacuum. It can be adapted for use at high pressure by simply replacing the dome assembly. The high-pressure dome assembly utilizes two optical windows and a UV quartz observation window mounted in a stainless steel dome. ZnS, ZnSe and UV quartz are offered for operation to 500 psi. Note that for high-pressure operation, the maximum temperature limit could be lower due to heat losses that depend on properties of the gas, characteristics the sample, and the operating pressure. For optimal temperature control, Harrick Scientific recommends our Automatic Temperature Controller for gradual heating of the system. Heater and thermocouple connectors are compatible with this controller. The Low Temperature Reaction Chamber, CHC-CHA, is designed for operation from -150°C to 600°C under vacuum. In addition to the heater incorporated in the sample stage, the CHC also features a cooling conduit connected to a dewar. The dewar can be filled with liquid nitrogen or other coolant to cool the sample stage below room temperature. For optimal temperature control, Harrick Scientific recommends our Automatic Temperature Controller for gradual heating of the system, both above and below room temperature. Heater and thermocouple connectors are compatible with this controller. To evacuate these diffuse reflectance reaction chambers, use our highly reliable, compact, low-noise level PDC Vacuum Pump with a minimum pumping speed of 1.4m3/hr. Compliant with international standards, it is ideally suited both for use with Harrick equipment and for general use in chemistry and research laboratories. Hermetically sealed by oil pressure controlled valves, the vacuum chamber is protected against inadvertent venting and oil backstreaming. This vacuum pump is supplied with a three foot length of ½" ID vacuum tubing and with the hardware to connect this tubing to the pump. Connections between this tubing and the HVC or CHC fittings (Cajon SS-4-VCO-1) are provided by the user. Figure 1 shows several infrared spectra recorded with the High Temperature Reaction Chamber in the Praying Mantis Diffuse Reflection Attachment. Harrick's Automatic Temperature Controller was used to regulate the temperature. |
|
|
| Harrick Scientific Products, Inc. 141 Tompkins Ave, 2nd floor PO Box 277 Pleasantville, NY 10570 |
| Phone: 914-747-7202 Fax: 914-747-7209 |
| E-mail: info@harricksci.com |